New product R&D-Energy saving extruder Extrusion blown film production line

R&D Center

Home page

All categories

R&D Center

High speed and high productivity die head

High speed and high productivity die head

The relationship between melt flow rate, flow rate and cavity pressure inside the die was calculated by mathematical method, as well as the disturbance of the whole melt flow caused by the differential flow produced by coextrusion of raw materials with different viscosities.

Automatic Control Feeding System for Longitudinal Uniformity

Automatic Control Feeding System for Longitudinal Uniformity

Automatic Control Feeding System for Longitudinal Uniformity The system will set the set extrusion amount and the actual extrusion amount of the extruder at a fixed time, detect the dynamic value, set and adjust the motor speed at a fixed time using the following and decreasing mathematical control model (i.e., the following control principle), and realize the constant extrusion amount. Due to the good constant torque characteristics of the traction motor (steady state accuracy of 0.5%), there is no change in the extrusion amount and traction speed of the film during the bubble forming and traction process, and the film is wound up in a small tension or constant tension without expansion. Ensure accurate dimensions, stable physical properties and the proportion of raw materials between layers of multi-layer models. It also makes a small amount of precious raw materials precise and controllable. It expands the space for high-quality films to be used in engineering or more extensive fields. It can better meet the use requirements of various types of high-speed printing, improve product value and increase economic benefits.

Taper Calculation of Winding Tension Control

Taper Calculation of Winding Tension Control

Taper calculation is aimed at the gradual attenuation of the control tension in the winding process. Its principle is that the tension will slowly decrease as the winding diameter gets bigger and bigger, so as to ensure that the larger the winding diameter is, the larger the area is, and the inconsistent cold and hot shrinkage of the film will lead to the phenomenon that the outer side is locked inside. In this way, the larger the film is rolled, the better it should be brushed, and the more the coil core is, the less it can be used.

Three in one center winding

Three in one center winding

Three in one center winding It is a new type of winding mechanism developed by our company in recent years. It has three forms of winding functions: active, passive and gap. It has two mechanical transmission characteristics of constant power and constant torque. It is suitable for film coiling with high requirements on different physical strength, density, hardness and appearance. The coiling weight and the diameter of the film coil increase exponentially. The organic application of three functions and two characteristics has produced many coiling methods. The high quality of finished coiling products is idealized. Combined with the existing automatic core changing, unwinding, automatic flying knife cutting, automatic slitting, scrap recycling and other devices, the material receiving system can complete the production task accurately and easily in an efficient and optimal way.

C-type automatic winding

C-type automatic winding

C-type automatic winding Type C winding is an upgrade of automatic winding. Its stability is better, when replacing the air expansion shaft, when rolling upward, it will not fall off; The operation mode of the winding flying knife is changed, so that its operation is ensured to be air tight and more stable.

圖片名稱

Contact number

+86-27-8681 1860

Follow us

Mobile website

Mobile website

WeChat applet

WeChat applet

Message

Message online

Whatsapp

Whatsapp

Email

Email

Hotline

086-27-86811860

Website

Follow us

TOP

Message
Top